Top 10 typical forklift crashes ， forklift procedure must take notice of these issues ！.

Top 10 typical forklift crashes ， forklift procedure must take notice of these issues ！.

Blog Article

Do not ignore the forklift at the workplace. If the procedure is not good, there will be major mishaps in mins, and there are lots of crashes entailing forklifts.

Instance 1: The forklift freight obstructed the driver's view, and the individual ahead can not be located, causing a moving crash.
Instance 2: In order to preserve the equilibrium of the forklift when lifting heavy goods, the employees used their body weight as the weight, which virtually created casualties.
Instance 3: The size of the forklift cargo exceeds the allowable width of the course and holds on the roadside rack, which practically causes an accident.
Instance 4: Forklift is speeding up and rolls over during a turn.
Case 5: The forklift vehicle driver did not see the pedestrian, and the pedestrian did not observe the forklift.
Situation 6: The forklift lifts the employees unlawfully, the forklift chauffeur does not wear the safety belt, the forklift lifter drops and the chauffeur is crushed when the forklift surrender.
Situation 7: The forklift driver did not put on a seat belt and fell from the lorry when it surrendered and was crushed.
Forklift procedure ought to take note of these issues ：.

Begin.
1. Before beginning, observe the surroundings, and after confirming that there are no barriers that hinder the safety and security of driving, beep the horn first and afterwards start.
2. For lorries with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) scale should be safe prior to starting.
3. When the forklift begins with a load, the motorist ought to initially confirm that the lots is stable and trusted.
4. The begin has to be sluggish and constant.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground should be kept at 300mm-400mm, and the pole should be slanted in reverse. .
2. Do not lift the fork expensive when driving. When entering and leaving the task website or while driving, be careful that there will be no barriers in the sky. When the load is taking a trip, the fork has to not be raised too expensive, which will certainly affect the stability of the forklift. .
3. After dumping, the fork should be reduced to the typical driving placement before driving. .
4. When turning, if there are pedestrians or automobiles close by, the driving signal should be issued first. High-speed doglegs are banned. High-speed sharp turns will trigger the automobile to lose side stability and topple. .
5. When the forklift is downhill, it is strictly prohibited to turn off the fire and slide, and it is prohibited to brake unexpectedly while driving with tons unless there are special scenarios.
6. When the forklift is running, it should comply with the website traffic rules in the manufacturing facility and should maintain a specific security range from the automobile ahead. .
7. When the forklift is running, the load has to remain in the lowest placement that does not hinder the driving, and the gantry must be effectively slanted back. The lots shall not be increased other than when stacking or loading. .
8. The height of the tons must not block the driver's sight. In special circumstances, when the product influences the forward vision, drive at a low speed when reversing.
9. It is restricted to switch on the ramp, nor to drive across the ramp. .
10. The secure driving speed of the forklift in the factory location is 5 km/h, and it has to drive securely at a reduced speed when getting in the manufacturing workshop area. .
11. When the forklift is raised, lifted or driven, it is restricted for workers to stand on the fork to hold things and play a stabilizing role. .
12. If troubles are found, they will be repaired and reported in a timely manner, and they will never run with health problems or conceal them.

loading and dumping.
1. When fork-loading things, the range in between the two forks should be readjusted as needed to make the load of both forks balanced and not manipulated, and one side of the item need to protest the shelf. .
2. It is forbidden to work with a single fork or utilize a fork top or draw. In special scenarios, security warning signs need to be established to advise surrounding pedestrians. .
3. In the process of filling and dumping things, the forklift has to be braked with the brake. .
4. The speed of the vehicle should be sluggish and constant. Beware not to roll the wheels on the dunnage, so as not to stretch the rolled objects and harm people. .
5. When utilizing a fork to fork the goods, the fork should be as deep as feasible under the lots, and it ought to be noted that the fork suggestion need to not touch various other products or items. The load ought to be supported with marginal back tilt of the gantry to ensure that the lots does not slide backwards. The mast can be tilted ahead somewhat when the load is decreased to allow for very easy positioning of the tons and removal of the forks. .
6. It is prohibited to fork goods at high speed and collide with tough objects with the fork head. .
7. When the forklift is working, it is forbidden for people to loaf the fork, so as to stay clear of the collapse of the goods and injure individuals. .
8. Overloading is prohibited, and it is prohibited to utilize forks to raise employees to participate in high-altitude procedures to avoid high-altitude dropping mishaps. .
9. It is not allowed to use the brake inertia to slip, place, round or roll objects. .
10. It is not enabled to use forks to select, transform pallet unload.

Leaving .
1. It is prohibited to leave the forklift when the items on the fork are in the air. Before leaving the forklift, you have to discharge the goods or reduced the fork structure.
2. Draw the hand brake manage to dead or dispirit the parking brake button.
3. The engine is turned off and the power is cut off. (Except for unique circumstances, such as the motorist does not leave the automobile's view and does not exceed 1 minute).
4. Get rid of the trick. .

Forklift Operation Precautions.
1. Before and after the forklift operation, the appearance ought to be inspected, and fuel, lubing oil and cooling water need to be added.
2. Check the safety performance of starting, running and braking.
3. Inspect whether the lights and horn signals are full and reliable.
4. Throughout the operation of the forklift, examine whether the pressure and temperature are typical.
5. After the forklift is running, the external leakage ought to additionally be inspected and the seals need to be replaced in time.

Forklift Safety Operation Specifications.
1. You should inspect prior to leaving the vehicle;.
2. When you experience someone before you during driving, you ought to send a signal at a distance of 5 m;.
3. The driving rate in the factory does not exceed 5 km/h;.
4. When driving, the nadir of the freight should be 0.3 m ~ 0.4 m above the ground;.
5. The transforming need to not be also sharp to stop the propensity of " cost-free switching";.
6. Adding Stand-on Electric Pallet Stacker and down the incline ought to be slow and uniform, and no activating the slope is enabled.
7. Do not drive across the slope. When the gradient is more than 10%, the vehicle must be driven backwards when declining;.
8. When the forklift employees bring the goods and move on, if they encounter big or heavy products and go to the motorist's line of sight, they ought to take the turning around exercise
.
The "Eight Prohibitions" must be adhered to in Stand-on Electric Pallet Stacker the operation.
1. Single fork operation is not enabled.
2. It is not enabled to raise the goods for far away driving.
3. It is not permitted to grab the goods by turning over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and various other hazardous chemicals with forks.
5. It is not allowed to make use of inertia force to grab the goods.
6. It is not enabled to make use of braking force to exile round or easy-to-roll things.
7. It is not permitted to bring people to work with the pallet or fork, and it is strictly forbidden to stand under the fork after the fork is raised.
8. Do not drive side to side on inclines
.
Auto parking is not allowed under the following conditions.
1. Contours, narrow roadways, train crossings;.
2. Areas with a longitudinal slope more than 5%.
3. When there is an obstacle on one side of the roadway, the contrary side of the section with the same length as the challenge ought to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844